 |
|
|
Information
NCR 5637 Bunch Dispenser
- Up to 50 bills presented in a single Bunch per transaction
- Up to 4 denominations using Front and Rear Access
- Uses NCR Standard Cassette (2700 notes each) - Shipped 3 million worldwide
- NCR Tamper Indicating or NCR Lockable Currency Cassettes available
- Note security (Bills retracted into purge bin if not taken)
- Purge Bin Options (Open / Lockable / Latchfast)
- Accurate bill sensing technology
- Designed for 10,000 trans/ month
- USB Interface
- Active Note marking
- Euro Compatible
Workload
| Hours per day | = 24 |
| Average number of transactions per day | =
280 |
| Average number of items dispensed per transaction | = 2.5 |
| Average Workload | = 255,500 Items/year |
OEM Variants
| The major area variants of the OEM bill alignment dispensers are: |
- Mechanical:
- Rear Access (short transport)
- Rear Access (mid transport)
- Rear Access (long transport)
- Front Access.
- 2, 3 or 4 Standard width cassettes
- Standard Security
- Tamper Indicating Securit
- Electrical:
- The dispenser is available in 115 V and 230 V main motor variants
- The dispenser control board has USB connectivity.
- Software:
|
Operational Environment
| The dispenser operates as an intelligent module under the control of its own on-board
microprocessor. It communicates using the USB interface. Dispenser device control
firmware resident in the dispenser memory interfaces with transaction control and diagnostic programs. |
Containers
The dispenser uses the wide currency cassettes. Refer to the Currency Cassettes Owner’s
Manual (B006-1297-F000) for details.
Currency Cassettes
- Latch fast security (standard). The security method takes the form of a cable tie or
similar through the door latch.
- Tamper Indicating security (TI). The cassette has a mechanical indicator to signal any
tampering via colour change to the indicator. In addition the catch can be fitted with a
seal.
Purge Bins
- Open bin.
- Latch fast bin. The security method takes the form of a cable tie or similar through the purge bin latch.
|
Power Requirements
The power requirement for the Control board is:
- Direct current:
- +24 V 10% 0.35 A
- +24 V Interlock.
- Alternating current:
- 115 Vac, 5.5 A r.m.s., 20.0 A surge
or
- 230 Vac, 3.0 A r.m.s., 10.0 A surge.
The OEM Control board supplies the following power:
- Direct current:
- +3.3 V 10% 0.5 A
- +5 V 10% 0.75 A
- +12 V 10% 0.5 A
|
Weight
The weights of the component parts of the OEM dispenser are:
- Front Access Dispenser:
- Basic unit (2 double pick modules + presenter) = 38.9 kg (85.75 lb.)
- Presenter unit =20.9 kg (46.07 lb.)
- Rear Access Dispenser:
- Short unit (2 double pick modules + presenter) = 36.30 kg (80.02 lb.)
- Mid unit (2 double pick modules + presenter) = 36.90 kg (81.34 lb.)
- Long unit (2 double pick modules + presenter) = 39.10 kg (86.19 lb.)
- Presenter unit (Short) = 18.3 kg (40.34 lb.)
- Presenter unit (Mid) = 18.9 kg (41.66 lb.)
- Presenter unit (Long) = 21.1 kg (46.51 lb.)
- Single pick module = 6.3 kg (13.9 lb.)
- Double pick module = 9 kg (19.84 lb.)
- Currency cassette (Plastic) empty = 2.16 kg (4.76 lb.)
- Currency cassette (Plastic) full = 6.62 kg (14.60 lb.)
- Currency cassette (Metal) empty = 3.48 kg (7.67 lb.)
- Currency cassette (Metal) full = 8.21 kg (18.10 lb.)
- Open purge bin empty = 0.28 kg (0.62 lb.)
- Open purge bin full = 0.42 kg (0.92 lb.)
- Latch fast purge bin empty = 0.82 kg (1.81 lb.)
- Latch fast purge bin full = 0.96 kg (2.12 lb.)
|
Dispenser Dimensions
The dimensions of the OEM dispenser with four pick modules are:
- Front Access Dispenser:
- Width = 300 mm (11.81 in.)
- Height = 768 mm (30.24 in.)
- Depth = 750 mm (29.52 in.)
- Rear Access Dispenser:
- Width = 300 mm (11.81 in.)
- Height = 700mm (27.35 in.)
- Depth Short Nose = 726 mm (28.58 in.)
- Depth Mid Nose = 846 mm (33.30 in.)
- Depth Long Nose = 960 mm (37.79 in.)
|
Contact NCR OEM for more detailed product specifications.
|
|
|
